Product Image |
|
|
|
|
|
| | | |
|
Suitable for most European plastic tanks, generally made by Acerbis. Flange-mount, center-to-center dimension of holes is 34mm/1... |
$31.00  |
| | | |
|
Suitable for most European plastic tanks, generally made by Acerbis. Flange-mount, center-to-center dimension of holes is 34mm/1... |
$31.00 |
| | | |
|
Aprilia COPY handlebar switch, including plastic base used for the left handlebar (7/8") switch used on later Ducati singles and early... |
$28.00 |
| | | |
|
Four clamp/straps as shown in the photo. Construction is 100% STAINLESS STEEL. Total length of strap and clevis about 19". These are direct... |
$63.00 |
| | | |
|
Made in Italy by OMG, this vacuum-operated petcock should be suitable for many Euro machines of the mid-eighties and later where such an app was... |
$34.00 |
| | | |
|
Suitable for any European fuel tank with 16mm x 1mm MALE petcock nipples, to my knowledge, which should cover most machines from '75-'86ish. ... |
$115.00 |
| | | |
|
Metal levers. Suitable for many European fuel tanks with 16mm x 1mm MALE petcock nipples, to my knowledge, which should cover most machines from... |
$65.00 |
| | | |
|
These seals should fit just about ALL Bultaco motorcycles from mid-sixties through mid-seventies. Dimensions are 35mm x 47mm x... |
$16.00 |
| | | |
|
These seals should fit many Euro models with Marzocchi forks of the mid to late eighties. Dimensions are 40mm x 52mm x 7mm. Two... |
$18.99 |
| | | |
|
These seals will fit ALL 35mm Ceriani and Betor forks. Dimensions are 35mm x 47mm x 7mm. Two single-lipped seals per leg,... |
$16.00 |
| | | |
|
These seals should fit many Euro models with Marzocchi or Ceriani forks of the mid to late eighties. Dimensions are 38mm x 50mm x 7mm. ... |
$17.99 |
| | | |
|
Brilliant. 100% stainless steel construction, but for the fiber damper disc and billet aluminum knob. Should fit any Ceriani 35mm front... |
$139.00 |
| | | |
|
Made by CEV, but suitable for many Italian applications of the 70s, I believe. Original for Morini, I'm near certain. Condition... |
$95.00 |
| | | |
|
Made by CEV, but functionally similar to the Aprilia junction used between the alternator/magneto and main wiring harness. Suitable for most... |
$17.00 |
| | | |
|
Made by CEV, but functionally similar to the Aprilia junction used in main wiring harness on larger model Italian machines of the seventies,... |
$76.00 |
| | | |
|
Fashioned after the factory version, this lovely tool will split the cases of any CZ unit engine of the seventies and eighties, to my knowledge. It... |
$69.00 |
| | | |
|
These seals should fit just about ALL CZ motorcycles from mid-sixties through mid-seventies. Dimensions are 35mm x 47mm x 7mm. Two... |
$16.00 |
| | | |
|
To suit just about ANY CZ dirt bike after '68 or so, to my knowledge. This lovely tool is fashioned after the factory puller, except for the... |
$60.00 |
| | | |
|
Dellorto part number is 52511. This gasket set is suitable for the rare VHBZ square-slide carb with bellcrank top, as fitted to six-cylinder... |
$17.00 |
| | | |
|
Dellorto part number is 52535. Suitable for wee FVCA Dellortos, not sure of app. If you're carb has the correct parts lettering, it... |
$11.50 |
| | | |
|
Dellorto part number is 52555, superseded from 52533. Suitable for wee SHB Dellortos, not sure of app. If you're carb has the correct... |
$12.00 |
| | | |
|
Dellorto part number is 52579. Suitable for wee SHA Dellortos, not sure of app. If you're carb has the correct parts lettering, it should... |
$11.50 |
| | | |
|
Beautiful stuff. Near surgical in feel and quality. Suitable for most carburetor vent line, any carb. Measures 3mm ID x 6mm... |
$2.30 |
| | | |
|
Brand new production, made in Italy by Domino/Tommaselli. Quite narrow, fantastic action. Includes wiring harnesses and blanking plate... |
$95.00 |
| | | |
|
Throttle and grips by Domino, the leading handlbar control manufacturer of Italy. I believe this throttle was OEM equipment for most 2-stroke... |
$62.00 |
| | | |
|
Manufactured years ago, perfect condition. Made by CEV, but direct swap for similar Aprilia. This 25/25W, twin filament bulb fits many... |
$8.00 |
| | | |
|
Pretty odd to find such parts here, but oh, well... Here is what they look like, installed, though of course the photo shows 500. Made by MCM,... |
$325.00 |
| | | |
|
Pretty odd to find such parts here, but oh well... Absolutely perfect. It is not nos, but could pass easily. I believe it fits the... |
$42.00 |
| | | |
|
Pretty odd to find such parts here, but oh well... Absolutely perfect. They are not nos, but could pass, easily. I believe... |
$70.00 |
| | | |
|
These seals should fit just about ALL Husqvarna motorcycles from mid-seventies through about 1981. Dimensions are 35mm x 47mm x... |
$16.00 |
