Product Image |
|
|
|
|
|
| | | |
|
Brand new, black anodized, perfect. This listing is for both the extractor and dummy shaft/shim locator. These beautiful tools... |
$65.00  |
| | | |
|
Ducati's part number for this nut is 0160-84-030, I believe. It should fit just about all small Ducati OHC single models to 160cc. ID is... |
$35.00 |
| | | |
|
Suitable for most narrow-case Ducati up to 250cc. Italian-made, very nice, new production. |
$124.00 |
| | | |
|
Sorry about the price, but these are the BEST gaskets available for old Ducati singles. This set should cover ALL widecase single models, 250/350/450. |
$95.00 |
| | | |
|
Custom-made to excellent tolerance, unavailable anywhere else. Perfect and lovely, to suit all Ducati widecase singles at the rear of the engine.... |
|
| | | |
|
Sorry about the price, but these are the BEST gaskets available for old Ducati singles. This set will cover most narrowcase single models, 250/350... |
$84.00 |
| | | |
|
NOS from Beck Arnley, English gaskets perhaps. But about the same quality as old Italian, which was only decent.... Includes everything shown,... |
$30.00 |
| | | |
|
Ta-DAAA! As promised, the unobtainable Ducati 250 narrowcase Scrambler pipe, ready to install. Needs nothing and sounds fantastic, a nice... |
$229.00 |
| | | |
|
To suit ANY 250 bevelhead Ducati, to my knowledge. All pieces crafted in stainless steel, length of the bolts a bit longer than 250mm, 10mm... |
$48.00 |
| | | |
|
Suitable for most narrow- and wide-case Ducati singles 350cc-450cc. Italian-made, very nice, new production. |
$148.00 |
| | | |
|
To suit ANY 350 bevelhead Ducati, to my knowledge. All pieces crafted in stainless steel, length of the bolts a bit longer than 260mm, 10mm... |
$52.00 |
| | | |
|
To suit ANY 450 bevelhead Ducati, to my knowledge. All pieces crafted in stainless steel, length of the bolts a bit longer than 270mm, 10mm... |
$60.00 |
| | | |
|
Perfect and lovely, to suit all 750 GT/Sport-style frames, and SS models with normal rear chain adjustment, I believe. Fabricated in... |
$85.00 |
| | | |
|
Perfect and lovely, to suit all 860 GT and 900 Darmah-style frames with eccentric drive chain adjustment, I believe. Fabricated in rust-free,... |
$79.00 |
| | | |
|
Ducati's part number for this nut is 0150-84-030, I believe. It should fit just about all Ducati Bronco models, regardless of... |
$35.00 |
| | | |
|
Fashioned after the factory version, this lovely tool should fit ALL belt-drive Ducati, even as far back as Pantah. Makes removing the left... |
$48.00 |
| | | |
|
Ducati part number 88713-0262, I believe. 10mm diameter, used for lining up rockers and shims during valve adjustments. It should fit ALL... |
$22.00 |
| | | |
|
I believe these guides were made by Rowe of SoCal in the early eighties. They are perfect copies of the Italian originals, including internal o-ring... |
$38.00 |
| | | |
|
Brand new in stainless steel. The tool is double-sided, to suit both the 12mm allen used in Marzocchi fork nuts and 14mm to suit the engine... |
$18.50 |
| | | |
|
Ducati part number 0090-07-320. This shift rubber should fit just about ALL Ducati : belt drive, bevel, 2-stroke, whatever. New... |
$3.95 |
| | | |
|
An awesome replica of the original white-face red-lined Ducati/Veglia tachometer of years ago. OEM Ducati part number is 0623-37-060, and this... |
$179.00 |
| | | |
|
Mounted to the underside of the front left cylinder head bolt, this plate was first used with the 350 Sebring to secure the valve lifter... |
$13.00 |
| | | |
|
100% stainless construction. To suit most bevel singles of the sixties and seventies, to my knowledge. (VERY early models do not use the... |
$38.00 |
| | | |
|
To suit nearly ALL Ducati OHC singles of the sixties, to my knowledge. Includes special stainless nut and clamp-on aluminum finned... |
$105.00 |
| | | |
|
To suit nearly ALL Ducati OHC singles, regardless of year, to my knowledge. This nut screws into the timing case, over the points... |
$13.00 |
| | | |
|
Condition is perfect, length about 25" / 645mm, new construction. Ducati part number 0420-98-060. It should be suitable for most... |
$25.00 |
| | | |
|
Fashioned after the factory tool, this version is 100% stainless steel. Lever is WELDED, not screwed, and fin teeth are CNC machined for... |
$38.00 |
| | | |
|
Brand new in stainless steel. The tool is double-sided, to suit both the 12mm allen used in Marzocchi fork nuts and 14mm to suit the... |
$18.00 |
| | | |
|
Brand new, case-hardened to better than original spec, perfect. OD of the shims is 10mm, as per the earlier, lighter specification.... |
$116.00 |
| | | |
|
Separate oil slinger fitted to the tachometer drive shaft on singles and early bevel twins. NOTE: This part should be suitable for all... |
$15.00 |
